Jump to content

delfinis38

Members
 View Profile  See their activity

  • Content Count

    3,471

  • Joined

  • Last visited

  • Days Won

    3

Everything posted by delfinis38

  1. delfinis38
    Chuggs it's a messy job... Cover the engine with an old blanket or similar. Get as much of the old foam off. When your down to the glue to remove Get yourself a garden spray bottle with white spirit in and spray on the old glue leave for about 10 mins to soak... Get an old credit card or my waitrose card and scrap... Simples. Don't scrap with anything else apart from a credit card...
  2. delfinis38
    Vwspares.co.uk....
  3. delfinis38
    dunno but its sold again recently..... wonder if the new owner will pick this thread up and look into the history.
  4. delfinis38
    Yup that's been on pistonheads for a very long time....
  5. delfinis38
    Nice... Looks like some old chaps... But no aircon... Wrong colour for me.... Looks genuine..
  6. delfinis38
    Resonator between the centre and the cat.... I bought a very expensive oem centre box and rear a few years back that's mint. It's the one that looks like a sausage.
  7. delfinis38
    before I get something fabricated up, I'm after an original VR6 silencer in A1 condition or that's going to last 10+ years. Its the silencer after the CAT. I have a new spare walker one but really would like an original or I will get my mate to make one up in stainless. my current one has a bit of rust round the end cans... its not blowing but not really that pretty.... so I guess it must be rust free.... currently obsolete at VW and vw heritage... like most parts these days.
  8. delfinis38
    did the cam cover come originally with the painted VR6 DOHC or is it something you have done yourself.... mine is just gold to match the cover.
  9. delfinis38
    Will do...
  10. delfinis38
    Few on pistonheads at moment dependant on budget. Good luck with your search.
  11. delfinis38
    yup late switch... me too only seen a guide for early switch... need to investigate further.
  12. delfinis38
    Only just clocked it was Rams corrado too.
  13. delfinis38
    Today was the day, after 20 years I could resist any longer..... Cut the inner edge of the roof strips off, well they peeled off ran a file down the rubber edge to tidy up and cleaned 20 years of rubbish dirt out. It doesn't look too bad.... Wonder if it's worth putting some silicon along the edge..... Also gave the wing mirrors a good clean... Must take the mirror switch apart it's very intermittent.
  14. delfinis38
    Another tidy blackberry on pistonheads at the moment for 6k.
  15. delfinis38
    cheers any sequence to tighten up.
  16. delfinis38
    Did it pass ?
  17. delfinis38
    http://www.ebay.co.uk/itm/16-Pin-Male-ISO-Terminal-Block-Socket-Connector-Repair-Kit-/251161675325?hash=item3a7a67063d These are the standard loom end connectors.... Which should connect into your stereo loom.... Modern stereo you will need to swap the yellow and red leads.
  18. delfinis38
    afternoon bump.... gasket sealant or dry..... torque settings...
  19. delfinis38
    Guess that was your old baby CWG reg
  20. delfinis38
    Should I bid another grand then :)
  21. delfinis38
    Nice but for left hand drive car.
  22. delfinis38
    Where's the best place to purchase one from... I guess I'm after the late type think it's rubber as opposed to paper.... Any advice for fitting... Any gasket sealer needed or just clean mating surfaces. Is there a sequence to tighten bolts and what torque. Ta...
  23. delfinis38
    And what rears are they ? May do the same.
  24. delfinis38
    Have a boat in Dartmouth. Live in oxfordshire
  25. delfinis38
    Lego certainly bring some good kits out. The cargo ship is my favourite. Sold out in weeks last Xmas. Kits were selling for silly money on eBay.
×
×
  • Create New...