Dox

:)

Do you have a link to the bulbs you bought? Have you got an uprated loom fitted? TIA

Arrived yesterday, thank you :)

I have that bleeder, around £40 at times on ebay. 280s, 288s and 312s all have 54mm pistons, so pedal travel should be similar for them all. The pedal does tend to feel a bit better once the brakes have bedded in after 100 miles or so with the occasional good hard stamp on the pedal

http://www.jandrcvjoints.co.uk/driveshafts-8/?page=6 I've only heard good things about these, T5 forums, facebook and pro mechanics too

Have you tried the spare transponder if you have one?

I did wonder if yours was heading north again while you took care of a green VRT for a while?

Well he's said he doesn't like green, so I'll say Rams old charged VR

It is, but that ones not a happy buying experience for him so I can't see him buying it back at £10K? Lots of nice cars for sale at the moment, turbo / supercharged VRs etc

Wheels for sale at a guess? Or as its his build thread he's buying another?

In the past I've just used the closest possible from used barrels and ground off the excess with the key in the lock.

I may have a sender for the above link if you need one. I'll offer to buy your used pumps too should they be made by pierberg

CTS are just temperature variable resistors https://www.google.com/search?site=&tbm=isch&source=hp&biw=1366&bih=614&q=vr6+coolant+graph&oq=vr6+coolant+graph&gs_l=img.3...2593.8795.0.9251.17.10.0.7.3.0.225.954.7j2j1.10.0....0...1ac.1.64.img..5.12.948._jiJPoG4h4w#imgrc=-IVvxofDr_K-cM%3A There probably a graph in the Bentley manual for it. After being sorn over winter my car idles like a bitch and cuts out, after a few runs out up to temp it idles fine. It could be the lambda is contaminated from idling, if yours is a hotwire MAF I've read that after turning off the ignition there's a current passed through the hotwire for 15 mins to burn off contaminants. Is there any chance you can take the car out for a varied drive? Maybe disconnecting the battery prior to this so the ecu can relearn the sensors parameters?

http://wiki.ross-tech.com/wiki/index.php/00533

They attach to the seat runner rail with thumb screws. I'll take a pic tomorrow

I have a set as well, I'd have thought they'd be ideal for over mats for the concours crew amongst us to drive to events?

And now paid for via PPG, thamk you

I'd like to buy these please but can't find a buy it now button? Has it been disabled due to recent problems? £30 posted is fine, I can sort paypal in the morning if you PM your email address for paypal please

Hi, you do realise average mileage for a 20 year old car would be 240K miles. There seems to be some decent cars coming for sale atm, it might be worth mentioning where in the country you are too? Good luck with your search :)

https://en.wikipedia.org/wiki/2014_General_Motors_recall

Or brake fluid? CV grease is usually deposited on the inside of the rim or wishbone / ARB in gooey black lumps

Mine does the same, I was hoping you swirl pot was intact but your pump faulty

Have you fitted the pump on the left? What's wrong with the Pierberg? pump on the right?

Isn't Tempests G60 US spec?