floppyman

Wow..... Nice dashpanel.

+1 Talk to him and record the conversasion... But I think its best on the street not on private property

I never seen that happen... But it sounds like something rong with abs pump

Ok sounds like the immobiliser is wired up to the starter. Have you tryed bump start it? Or Pull handbrake, make shure its in neutral, leave ignition on, open bonet.... On the starter motor theres one wire and a plug with one wire only. Disconnect that plug and bridge the pin with the other wire thats connected to the starter motor (with a screwdriver or some wire, just make shure the wire you use is not too thin). With that the starter motor will turn, if and when the car starts disconnect your bridge connection and take the car home.... Hope that helps

And.... What engine is it?

First you need to find what type of immo is it.... Do the dash lights come on when you turn the ignition on? Can you hear the fuel pump run?

My 1989 g60 does the same.... I think every corrado does that, unless its broken

For locking the engine.... Hold it with a socket and a breaker bar on the crankshaft bolt, or use a crowbar or a strong flat screwdriver on the flywheel trough one of the holes

Put the allen socket in the bolt and a extension on the socket and hammer it until you cant handle the hammer anymore. Then use a good long ratchet and it should crack open

Well the thing with the mk4 controlls is that its not a straight swap... You need the mk4 heater box, cables, loom... And needs some mods for it to fit

I was faced with the same problem, needed one but they were all going for around £100. Went to the mk4 golf heater controlls... A bit of work but £40 cheaper is well worth... And they look better..... Work better.

Whats rong with the cheap coilovers.... I have in mine for over 4 years now. Ok, ok.... I cant adjust them anymore.

Wow!!!!! Ok..... Theres not much that can be done.... The housing it self is all broken. If there was any part that I could save it with, I would send it to you... But afraid theres not much that can be done to it.

Yes send a photo... I have one but its all in bits. Maybe theres something that can be done.

Sorry cant help with a new one... But what is rong with yours?

Lol royal fail..... Ok ill take the rest for the £40 courrier. Pm meeee

One pcv valve G60 cambelt covers Charger oil feed pipes How much posted to tw19 if possible? And would be interested on the short g60 driveshaft if you want to split them

Was that one of those £10 argos boxes?? I had to go and buy a more priced box.

Sorry.... But ive stoped watching before the crash.... This friend of a friend is a really bad driver.... Bad lines, gear changes. Shame really

But... Is there space for it or has it been modifyed? You can allways put a external one, just need to get a 12v supply

I will try to do one for the heater controlls... The only problem is that my original controlls are all damaged. I will make one and then will most likely send it to some one to try it out

No problem. Anton has got the first one so I will have to wait for his old one... Unless you want to send me yours and ill do it within one day and send it to you.

Its mk4 golf heater controlls.

Ok finished with the ashtray light. Its a green led and it looks great, much better the the original one, heres some pics. Cant really see but theres a very nice difference. Top one is the brand new I got from tps the other day, the bottom my led mod: The original on its own: And the led mod: Original: Led mod: Looks really nice. Same price £6

Dragon green ill take them if dec doesnt.