owen g60
-
Content Count
1,264 -
Joined
-
Last visited
-
Days Won
1
Everything posted by owen g60
-
It's testing when it happens. Where I used to live I came out to several key marks down the length of the car. It seems to be a regular occurrence these days. Hence I moved to a quiet area
-
I've got a set coming from bar tek. Ill drop you a pm if I don't get on with them
-
Porsche 928 alloys and tyres with 4x100 adapters
owen g60 replied to vagingit.co.uk's topic in Parts for Sale
I have some deep dish BORBET t's in 16 inch by 9 inch et 35 With 205/45/16 toyo t1 R on the front. Rear tyres need replacing soon. Possible straight swap? -
I had to drill the heads off mine. Once the pulleys were off the bolts undid by hand.
-
I have the factory inter cooler pipes. May have the inter cooler too. You will need to get a RSR outlet if you don't already have one and a radiator fan and surround.
-
Just a warning. My studs were torx bits not Allen studs.
-
There is an article done by matey-matey... Was from a rebuild done by gwerks, has the intervals depending on pulley size plus a few other bits.
-
For Sale: G60 engine parts. Pistons, cylinder head etc
owen g60 replied to dumptyboy's topic in Parts for Sale
Do you have the toothed crank pulley and dampener? Ill take it with aux pulley and pas pulley if needs be. -
As per the title. G60 crank pulley and damper. Either as a pair or with aux pulley and pas pulley. Desperately needed!
-
Where are you based and what price are you looking for?
-
I think your best bet would be to contact SNS as that's quite a specific build you have there
-
I'm after a pair of late wings. Colour is not important, just need to be straight and rust free. What do people have. Will buy from separate people if needs be.
-
american spec side repeaters, orange with bulb holders
owen g60 replied to iamsilverfox's topic in Parts for Sale
Interested if the price is right -
What set up do you have? I will have my old chip available in the next couple of days
-
No thermostat fitted or faulty black temp sender would be my thoughts
-
Bournemouth/Poole Meet Saturday 20th April
owen g60 replied to Rams's topic in Event Announcements & Discussion
Ill be there. Car may be a bit temperamental... Depends on how good my new map is. -
I know of 3 different ecu models. Mine being a later eg one had 4 wires on the diagnostic port under the gear stick allowing running diagnostic and recording from the ecu via vagcom.
-
What's the part number on it. I'm after another late one part number ending in eg
-
You would need the heater box and cables plus wiring to do the retrofit.
-
50mm splitter with no cracks? Pair of late wings any colour with no rust?
-
Bournemouth/Poole Meet Saturday 20th April
owen g60 replied to Rams's topic in Event Announcements & Discussion
Ill be there as ill be back from the Middle East and car should be back from getting back end welded up as well -
Reds are always a good bet unles you have some serious mods. Lime greens from a rallye have been mentioned before Not sure on flow rates for either
-
So glad I managed to get my head and cam done last week. Cars now in body shop for some rear end work as I'm abroad for the next week.
-
The car feels very flat at the moment. It was really savage before the head and cam went in. No bigger valves at the moment. I've set the timing at 6 degrees as per the Bentley. I'm wondering if its to do with the way the cam is... Max lift at 106 degrees instead of 110 as per standard cams and schrick/Newman etc?
-
If you can get some pictures up of the bores and piston crowns I may have at least one off you