flusted
-
Content Count
2,755 -
Joined
Everything posted by flusted
-
yes chip written for spec
-
still not in there? thanks alot for your help anyways
-
My 16v lysholm just failed mot on co. It was 4.2 and kept climbing at 1 point. Can this be adjusted on the co pot? co pot currently set to 500 ohms or is it down to the chip and the fact im running 440cc lime greens? Thanks in advance
-
aha everything but what i need on there! nice 1. Valet mode is so you can completely turn the alarm off and all its features until you arm it again.
-
How do i turn this on as i have mot tomorrow and they get funny about the hijack being on
-
the harder 1 is the replacement for the flimsy 1
-
yep mines lifted straight from a RHD mk2
-
should be any up to 91?
-
Ive only done 1 lense, doing the other tonight.
-
why cant g-werks make 1 for the 16v g60 boys wink wink nudge nudge
-
Started tonight on 1 light. Hairdryer to warm up glue that holds lense on, then unclip the reflector from adjusters, unscrew the projector which was a PITA then swap the plate around inside Just gota suss how to glue the lense back on
-
bump for advice?
-
im guessing hair dryer to heat up the glue, but hopefully some1 will shed some light (excuse the pun) il have a go at mine next week
-
nah ive gone ABF cams as thats what JD run apparently. If you mod the chainwheel properly theres no downsides what so ever. Stealth racing used to use them in there 16v turbo conversions
-
the lamda partly controls the co?
-
Take glass out? plastic front is glued on? do i heat it up? help help help :lol:
-
mine are sonar, bit crap quality but bought them from a guy locally on the island. Anyone got any info on changing the sonars? Got the HIDs (sounds like a disease) from ebay about £50 all in but they are H1 only, got them from a uk supplier rather than hong kong
-
you may have slight leak or do you have any flow work done? as i said, mine made 1880 with flowed everything, FMIC and 65mm pulley
-
I expect they are illegal on standard lenses but if you use projectors it should be fine. Heres mine as ive just found out my headlights are LHD argh Got mot on thurs aswell uh oh
-
Mine used to see 1880 with a 65mm pulley on the mfa
-
that seems fine?
-
There are different amount of leds on these bulbs in the guys auctions, i went with the highest ammount of leds. Think this is where people may be going wrong. need to be 30
-
Multimeter set to volts, stick the live probe down the purple wire on lambda plug whilst still plugged in and running, voltage should fluctuate
-
you will make more boost lower down either way
-
i ran a 65mm, nice instant power, just change at 6k