volksworld13

jamex are ok, the ones with the blue spring and helper spring on the front, my springs have now rusted after 9 months, and the rears make a arcing noise like a seal when on rough uneven ground, after endless faffing around i put up with it, didnt get this with my original vw suspension, could be a common trait with coilover?

im sure if you had a tooth out, it would run alot worse than what your describing, if your worried, get it timed and take some photos , of the intermediate sprocket cam, crank timing,to see if its in ok.do you have vagcom,or a code reader at hand.?

still not working arrrhhh :gag: :brickwall:

id take it back to stealth and let them have a look, vince has many years experiance on the vr engines, it could be a sensor problem, air mass meter. ?ect what is it delivering on the rolling road?

that bracket bolts to the nsf suspension tower, and the power steering reservoir clips into it. its held in by 2 10mm nuts.

are you for real, thats peanuts for all that work! im going to make some enquiries nxt week.

is this quite expensive , the beam axle but of cost a few quid. :shrug: im interested in this process, just need to know a ball park figure so i dont get ripped off,

ok bit of an update, just been cleaning and inspecting the body and engine looking for hidden corrosion.also been trying to get loads of parts ordered, im finding alot of stuff going obsolete :( . got my self a new front grille, and rear number plate lighting unit and cover, and loads of new new engine nuts and bolts,slam panel and wing fixing screws. next is a new rad, theromstate housing/crack pipe. ect.passat climatronic wiring diags.pdfCIMG0003.JPG[/attachment:zxfjxms0]

good good, thought my computer was blocking the parts pages as it was blank!!

looking good,no exspense spared, this will be worth some serious moneys in the future, restored to a high standard!! :D

good work keep it up, need some more rados saving from the breakers.!!

need some new keys for my 95 storm , just wanted to know, how many key the car came with? think it was two.and did they come with the key with the light in it , or not? cheers :D :shrug:

i agree with kip, keep it original, !!

yesterday and today been cleaning the battery tray, and passenger side strut tower. come up quite nice, also bought some mguires leather feed, highly recomended,bring leather back mint , and makes it a lot softer. also received a brand new vw rear badge , and storm badge off ebay, both brand new absolute find!!! also brand new vag bonnet prop, and rad cover both on back order for ages..pics to follow. i just need to make more space in the garage to remove the engine and start inpecting what needs to be done.its amazing how clean paint comes up with a bit of work!Corrado92.pdfCIMG1485.JPG[/attachment:254xe82r]passat climatronic wiring diags.pdfCIMG1491.JPG[/attachment:254xe82r]climatronic wiring-Golf from May 01.pdfCIMG1495.JPG[/attachment:254xe82r]2.8l 24v Climatronic system.pdfCIMG1518.JPG[/attachment:254xe82r]CIMG1519.JPG[/attachment:254xe82r]

as requested drivers side outer seat bolster p/n-53588137b handbrake cover trim plastic-p/n-535711463 leather handle handbrake-p/n-357711320 if you need more p/n ,register to vagcat , you can look up your own bits. hope this helps :D

still means your abs wont work,which i kinda like having , safety reasons.

ate are the manufacturer for the component, im just thinking what other sensors do we have on vw, that will fit,in which we may have to modify the sensor connection? this is a real problem, and we def need a solution.

boll*cks!!!! :mad2: :censored:

its like condoms for corrados :camp: im in and out of it all the time with dirty/oily hands, dont wanna wreck the new leather. i have to use these at work for customer cars as well!! :norty:

will do, just need more dough for parts, just trying to think hard on what parts will be going obsolete, so i can buy them now before they are gone forever.!! :brickwall: its gunna take a while to get it to a standard im happy with, tucked up in a warm garage with a pit, is very handy indeed, im very fortunate!

more parts!! new heater control cables. defrost cable-£7.80 control cable-£10.23 cable-£12.74 total incl vat =31.09 front bumper bolts-4 £2.17 each rear bumper bolts -4 £1.84 new front end slampanel/wing bolts-10 59p 4 new bbs center caps-£10.13 rad cover sticker-73p bonnet release cable with nipple ends £31.12 ciggy lighter bits/bilb/trim-£4.10 air filter vr6-£12.50 rear boot hinge covers-£2.96 more nuts and bolts,screws,washers ect. total incl vat+£103.94 2.8l 24v Climatronic system.pdfCIMG1483.JPG[/attachment:7lppt0rv] currently ordered but on back order, new front grille, and rad cover. some picys as always!passat climatronic wiring diags.pdfCIMG1478.JPG[/attachment:7lppt0rv]climatronic wiring-Golf from May 01.pdfCIMG1480.JPG[/attachment:7lppt0rv]CIMG1460.JPG[/attachment:7lppt0rv]

the price is on the web site, i think, we at vw use them, and othe dealers so the quality of work is good, depends on what you want done, and booking them in. a few day i expect. let me know on the wheels, if you can get t me on them to me on the way than i would gladly give you the money, as my car is also very tight, see what you can do and let me know. cheers

hi fella the best place is the polished wheel company in wadebridge, about 6 miles from me on the way, i will have the wheels off you if you are passing! type in google search the ploished wheel company and it will come up, cheers alex

i first steam cleaned the area with some degreaser, around the battery/airbox trays,struts, ect, to get the real grime thats been welded there for 15 years ive been using tar and adhesive remover, from work. then finsh off with a coat of mguires polish, seems to do the trick lovely still gotta do the other side yet. just getting time to do it. :D

thanks jim. will keep the pics coming as they are always good to look at,ive got timing chains, clutch and cooling system overhaul next, just trying to raid my piggy bank/to get extra dough! :salute: