Jump to content

1xshaunx1

Legacy Donators
 View Profile  See their activity

  • Content Count

    1,565

  • Joined

  • Last visited

  • Days Won

    16

Everything posted by 1xshaunx1

  1. 1xshaunx1
    Sams Salvage, say no more
  2. 1xshaunx1
    Very nice. 225 on an 8” wheel. 215 is a little stretched. Best grip tyre and last fairly long are Michelin pilot sport, not cheap though.
  3. 1xshaunx1
    Oooo a can of worms indeed
  4. 1xshaunx1
    Nice. What’s the Hel part number for that please?
  5. 1xshaunx1
    I try and avoid sams salvage
  6. 1xshaunx1
    How much for this shipped to the uk please Chris ?
  7. 1xshaunx1
    That smacks as malicious damage to me. You can still get the rear quarter glass from classic parts in Germany near £400 delivered. I doubt the doors will ever be the same as the metals pretty thin at the joint especially if it’s started to rust behind the seal. Good luck matey
  8. 1xshaunx1
    I’d stick With 4mm for both and get a different colour if you really want them to be more identifiable. Very interested how you get on.
  9. 1xshaunx1
    I think your controller will be ok. It’s the fusing and wiring I was thinking about. If it goes wrong it could be spectacular and you could probably do without that
  10. 1xshaunx1
    Got mine running off of relays with their own fuse triggered by the oem fan set up and plug so I didn’t draw too much power through the oem wiring. Not an expert either bet cressa has a better idea
  11. 1xshaunx1
    Well done for managing to get one. Question though. Will the power cable for the third Speed handle the increase in amps or will it get hot and melt the plug if it comes on for any length of time ?
  12. 1xshaunx1
    Part of EU law I believe is that manufactures need to supply parts for 15 from production end of a vehicle. After that you are in the hands of the gods.
  13. 1xshaunx1
    You should be proud as punch matey it looks mint
  14. 1xshaunx1
    Black and silver for your car I think. Black and blue for mine 😉
  15. 1xshaunx1
    Good progress there matey. have you considered how old is the slave cylinder you put back on, can be a pain later if that goes 😉
  16. 1xshaunx1
    12v in on all three feeds to fan.Power Resisted down in the fan unit, hence the wire sizes being different. pretty sure it shows this in the Bentley Corrado manual wiring diagram on the subject. Don't feel too bad about the fan it was after all 25+ years Old.
  17. 1xshaunx1
    I’ve found it best to leave it a few weeks if you can for it to harden off properly too. You should be good with 4 coats.
  18. 1xshaunx1
    Looking like it now. If you look at the first page on my thread I show the results of orange peel/shrinkage removal, but I started with 1500 and finished with 2000 for quicker buffing. It truly is amazing the finish you can get if you have applied enough clear coat.
  19. 1xshaunx1
    I bet that only half your collection 🤣🤣
  20. 1xshaunx1
    I borrowed my step sons big makita 18volt 1/2” impact gun. Little grease
  21. 1xshaunx1
    I had one for DPD The other day. Beware people’s
  22. 1xshaunx1
    Speechless !!
  23. 1xshaunx1
    Well done jp. It’s a lot easier the second time, determination is what you need and showed 👍
  24. 1xshaunx1
    One of the best 1st posts I’ve read. I think you’ll be on the road before me👍
  25. 1xshaunx1
    More like it 👍
×
×
  • Create New...