Cressa
-
Content Count
3,255 -
Joined
-
Last visited
-
Days Won
18
Everything posted by Cressa
-
[email protected] Message them direct, I hope it helps
-
As above. 👍👍. Is there space for a lean-to, or get some scaffold poles and wrap it in polythene. Not pretty but keeps the weather off it Good luck
-
Ah shit now you are spoiling us. They look great OE, but that bleed valve cap has to go 🤔🤣
-
About time we had an update from you 😊. I am jealous of those parts 👍
-
Goodluck with that. Hopefully will be good this time
-
Ooooo shiny coated parts, love them. Makes me want to redo mine. Shame putting the bushes in is such a ball ache
-
Always nice to get that list ticked off. Well done in finding and solving that problem mate. Time for a well deserved beer
-
And I managed to fit the little rubber that was missing from the boot popper. Said NLA but is available from Classic !! and it also fits in the dash holes as well as the handbrake rest
-
Not even £2 each, so was worth a cheeky order with my other bits 👍
-
Sounds good to me. I didnt do German so had Google translate tell me 👍😁
-
And after something Keyo said about the corrado glass sticker, which I had also seen but no further info. So I put them on the order. Here they are Bitte nicht streicheln please do not stroke 🙄😊 As the picture, there is an outside one and an inside one. What do you think?
-
Finally got my present from classic parts today. Some vw wheel bags for the spares 🤣🤣 and a new power steering reservoir to help things look clean and prettier. Most important was my lower steering trim that I broke recently😡, so I am glad that can be sorted
-
Oooooo how pretty are they. What pads are you using? Although I would swap the bleed valve rubber covers for the stumpy black genuine ones 🙈
-
May help
-
Did you sort your illumination out? And did you manage to fit the driveshaft without removing the sump?
-
This has been raised before with different people having the same problem. I will do a search and see if I can find it. Its 5 years since I did mine but remember it being a pig.
-
She looks great so well done. Now you can enjoy driving her 🚘
-
Ive just emailed olisco support to see if they can sort it. There is a phone number too Hopefully it will be sorted soon 👍
-
I would have thought it is fine. Has been until now. Although i thought you would be onto classics for New... I haven't checked if this fits a VR, but I would love shiny new ones 😍
-
Impressive mileage there 💪
-
That paint job looks fantastic in the sunshine. Are those Summer wheels? 😊
-
I tested mine and it was as above, ignition on. Does seem strange !!!
-
As above..... and a swine to dry out as the insulation under the carpet absorbs it all. Good luck in checking. I would start with the bulkhead drains that go into the wings. But more likely to be the doors. Are the drain holes in the bottom of these clear ? To help check if it is the door membranes, try putting tissue paper along the cill just inside the door Good luck
-
Had the fuse blown? Have you tried to manually wind it from the motor? It would be easier to drop it out the car now and work with it on a bench. Undo the bolts and pull off the two drain hoses. Very quick to put back in, or temporarily tape some plastic over the hole. Perhaps pray for good weather ...
-
Hopefully an admin could contact Toby. Otherwise I will have a look for his email address.