easypops

I would check the condition of the wiring going to the switches on the TB.......they can be broken inside and the cover still intact

And it always lands on the mirror and window switches :lol:

Make your own ? :D viewtopic.php?f=19&t=87813

Thought i better update this as not done so for ages.......since the last update i have needed to have a few things done Full set of discs and pads all round, New clutch, clutch release fork. That was it for a wee while, then noticed an oil leak at the front.......turned out to be the oil pressure switch, that easy a job i did it myself :lol: Then the exhaust started blowing ......it was a Stainless Steel cat back system which had been fitted almost 5years ago by C&C Custom Exhausts in Hillington, Glasgow......which is only 10 mins drive from me, so i went there armed with the receipt (Thanks again Joe) to see what they would say, and i have to say what nice helpful guys they were, not only were they happy to sort it, they basically renewed the lot barring the back box, all for no charge.......lifetime guarantee indeed :clap: :notworthy: Still to get the bodywork issues fixed, but that'll get done eventually.........with the 'new' exhaust it now starts , idles and revs better........and it wasn't that bad before :D Also fitted the Gunsmoke Light tints bought from Riley(cheers mate)

Fitted the Gunsmoke tints i recently ordered from Riley, i think they look 8)

3rd link i gave you has a picture mate :salute:

ISV ..........try using the search, its a very common fault :lol: viewtopic.php?f=1&t=86921&hilit=isv viewtopic.php?f=1&t=80472&p=932056&hilit=idle+1.8+16v+kr#p932056 viewtopic.php?f=1&t=74879&p=871915&hilit=idle+1+8+16v+kr#p871915 viewtopic.php?f=1&t=73734&p=857764&hilit=idle+1+8+16v+kr#p857764 There you go.....some light reading to get you started..........and here is one more for you........for your other thread, but i'll put it here...... viewtopic.php?f=1&t=80780&p=935663&hilit=isv#p935663

Well thats them fixed.......seems to have been the bulb holders, as i was getting power through the red/black wire(cheers VEEDUBBED )........i'll have a closer look at the holders to see where the fault is when its a bit warmer in the garage :camp: :lol:

Let us know when and how you want paid mate......happy to do bank transfer......or the dreaded paypal :D

2 for me too please :D

I'll have a look in the morning if i have time , if not it'll be in the dark tomorrow evening........although i have already had the connectors on and off and all seems well there, especially as the lights are working, and they are the same bulbs as the brakes :shrug: I think in reality the problem must lie behind the fusebox/brake switch, although i haven't done anything in that area to cause anything?........i'm just hoping someone will suggest something else before i need to get involved with spaghetti junction :lol:

Just went out and unplugged the wiring to the switch on top of the brake pedal, bridged the 2 contacts with a piece of wire but still the lights won't work........i guess this means there is either a break in the wire 1. Between Fusebox and Switch? 2. Between Switch and the Lights? :shrug:

Hello all :D , Just noticed that my brake lights(both sides) have stopped working. Not sure how long its been like that, as i haven't been doing too many miles recently(dodgy exhaust.......repaired today :D ) Both bulbs look ok, both filaments are fine and the car lights themselves work ok, the fuse (No20) 10amp is also fine, and yes i did replace it :lol: I removed the switch from above the pedal and tried operating it manually, which also didn't work? They were working as recently as a month ago as i changed a bulb and got my mrs to press the pedal to check etc. Any ideas/suggestions welcome :D :help: Thanks Martin Oh and as always i have looked in the search :D

Thats bruceybaby........ viewtopic.php?f=11&t=84909

viewtopic.php?f=15&t=87435 :D

I have a set, the same as too hot......which i have already taken apart, had the centres powdercoated and am in the process of stripping the rims/polishing the lip..........and have been at it on and off for months :lol: ......i'll get there eventually as i totally love how this wheel suits the corrado :notworthy:

There is a control unit behind the rear drivers side door card.......maybe worth a look

Very nice......and you must be even younger than one of our other irish members :lol:

I'd say between £700-£1000

Its on the cat mate, drivers side iirc :D

Also check that you have put the 2 small hoses back on to the underside of the rubber thingy that joins onto the throttle body........i too had a nightmare trying to get those allan studs out.......had to order new ones from vw as they were destroyed in the process Good Luck :D

http://wiki.the-corrado.net/jammed_bonn ... _tips.html :D

This is the CORRADO forum mate :? .........so i'd say 100% Get the audi, get the roof down...........and wish you still had your corrado :lol:

The one i had didn't have any rust.........that was 5+years ago mind, probably fell to bits by now :lol: .......There is one parked round the corner from where i live, i think i'll have a wee nosey, while trying not to look like i'm about to break into it :D

I had one of these before i got my first corrado, great cars, solid too, felt that if you did have a bump.......you'd probably have won :lol: