GlosterOx
-
Content Count
1,764 -
Joined
-
Last visited
Everything posted by GlosterOx
-
Agree, they sure do! Ian.
-
Apologies for hijacking this thread, but I have had fitted today a custom 304 stainless catback system in 2 1/4 inch pipe so my magnex (?) 3 piece system will be up for sale shortly, hopefully get some pics up tomorrow. Ian.
-
Surprised you're breaking it as it looked (on paper) a good car? Ian.
-
oil "leak" - could it be from sump gasket? (wrong type?) - VR6
GlosterOx replied to Mawrick's topic in Engine Bay
If you used the 2.8 24V Alum Sump then there is no gasket, just sealant. Ian. -
Amended my post #4 with Part Nr. ian.
-
It is listed on Classic Parts (not cheap) so Heritage should be able to order them for you - Part Nr is 535 853 393. Ian.
-
Unfortunately I've only got spare copies of the last 2 or 3 issues, as they ultimately get forwarded onto Ron (Merchandising). Ian.
-
You should be able to buy it from Maplins, less than a £1 last time I got one. Ian.
-
These fit OK: http://www.veedubmachine.co.uk/pair-parcel-shelf-straps-corrado-vag.html Ian.
-
I would agree, around the £10 > £15 mark. Can you post a picture up of them Anna? Ian.
-
I'm guesing that LED Sidelight bulbs would be OK though? Ian.
-
Snap, always used a 36mm socket without any problems as long as you don't overtighten it. Ian.
-
Yes, use the MK3 Roof Cassette,dump the glass as it is the wrong curvature and refit your metal panel to it. Ian.
-
Carefully remove the Interior Light and then (from memory) there are 2 screws that hold on the plastic surround. Remove that and then you shoud see attached to the sunroof motor a cranked "tool" which will manually wind down the roof. Hope that helps? Ian.
-
SEAT nuts and bolts part number - are they the same as VW
GlosterOx replied to edd's topic in Drivetrain
There is a lot of commonality throughout the VW/Audi/SEAT/Skoda ranges for things like nuts and bolts etc so as long as you are confident in the Part Nr's I would say that you should be OK Edd. Ian. -
Would be useful to know, what are the Part Nr's of the incorrect spring and it's correct replacement? Ian.
-
Not sure of the exact name, but there is a release arm(?) for the clutch that has been known to crack/break in the past - Had mine replaced when the chains were done and the part was around £15.00 from memory. Ian.
-
PM sent. Ian.
-
Bump - Have another set of these available on an exchange basis if anyone is interested? Ian.
-
Agree too, stick with a gravity system. Ian.
-
Wish I still lived in Poole, he could have had a go at mine too if he wanted! Ian.
-
Yes it does, it is what I have in mine currently - See pic:
-
Pretty sure I have a late Grey light/sunroof assy with the flat switch, as per the MK3 Golf? Ian.
-
Sorry Andrew, got back at 3.15AM this morning. Yes, the heat was nice but was tiring with all the walking we did. Perhaps catch up next time? Ian.
-
Good news Jim, get it bedded in and enjoy again. Ian.