Dox
Subscriber-
Content Count
5,281 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by Dox
-
http://www.ebay.co.uk/itm/Corrado-VR6-Rear-Shocks-Springs-/171328476161?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27e3f91401 Any good?
-
Is this the engine that suffers oil pump drive failure because it drives balance shafts off the same drive? 1.9s run the oil pump at half engine speed, 2L drives the pump and balance shafts at twice engine speed using the same 6mm hex drive and the corners simply wear away?
-
You could fit the lowering top spring cups to get another 15mm closer to the ground if you decide it needs it after the springs have settled? I've seen this car in the flesh, very nice indeed :)
-
Paint on the rear face of the wheel where it meets the hub or the hub where it meets the wheel will crush and the bolts come loose. Wrong wheel bolts - taper bolts on a conical seat wheel (or vise versa) - the bolts wont have enough surface area on there seating, the alloy will crush and the bolts come loose. Most tyre places will either tell you or advise on the invoice to check wheel bolts after 100 - 200 miles or so, plenty do them up so tight you need a scaffold pole to get them off leaving you stranded if you get a puncture and only have a standard brace..... This really ****es me off!
-
rear bumpers, 4 cyl slam, front xmember, g60 petrol tank + pump 5 forum donation each (Crewe) All the below collected from Crewe Cheshire for 5 forum donation each 1 late dragon green rear bumper cover (ex VR6) 1 early Grey rear bumper cover (ex G60) 1 4 cylinder grey slam panel (ex G60) 1 4 cylinder front crossmember (ex G60) 1 G60 petrol tank with high pressure in tank pump (currently not working but may free off?) Sorry no postage List Date: 5/12/2014 For more info, click here to view the original listing: rear bumpers, 4 cyl slam, front xmember, g60 petrol tank + pump 5 forum donation each (Crewe) -------------------------------------- This item is no longer available. -------------------------------------- Mobile friendly version: rear bumpers, 4 cyl slam, front xmember, g60 petrol tank + pump 5 forum donation each (Crewe) Go Mobile: Download the free Panjo iOS app now!
-
I'd go for a temp gauge, you could use several senders via a dash mounted switch and monitor sump temp (via a sump plug mounted sender) filter housing temp, coolant temp etc These cars are getting old, dashes erratic at times and wiring going high resistence - from your sig pic it looks like you do the odd track day?
-
I've been looking at this http://www.ebay.co.uk/itm/CCTV-8-Channel-DVR-Full-D1-Recorder-8X-Outdoor-Indoor-Camera-Surveillance-System-/200991113242?pt=UK_CCTV&hash=item2ecc01001a It seems very reasonable for what it is. Thoughts? I'd be interested in what the dogs get up to when we are out, one will sleep all day, the other stresses a bit.
-
Gearboxes, 1.8T EVS, 10V V5 EBS, 20 each GWO (Crewe) - SOLD
Dox replied to Dox's topic in Parts for Sale
Sold and gone Locked -
Its a volt meter and oil pressure gauge (not ammeter and oil pressure). Second hand ones crop up on here every few months or so, put a wanted advert on the forum for one?
-
Do you have a build thread? I have looked previously but failed to find it:(
-
-
http://the-corrado.net/showthread.php?t=78048&highlight=exhaust+bracket+sale Is this it?
-
Same car as here http://the-corrado.net/showthread.php?t=83729
-
Thanks for the reply, I'll leave it. GLWS :)
-
Does it have the hanger mentioned above? Is postage included in that price?
-
The car looks very well mate:) I wish I could do that stuff with video :(
-
Can anyone recommend a 4+ camera CCTV set up for home use or any advice in general? I'm thinking night vision cameras with 2 cameras to cover the front of the house / cars, 1 to cover the rear and another to cover the garden / or inside the living room to see what the dogs get up to when we're out.... Ta
-
G60 engine loom / 1.8T engine loom - No Longer Available
Dox replied to Dox's topic in Parts for Sale
Make me an offer, include postage if you need it, the whole lot pictured is quite heavy -
G60 engine loom / 1.8T engine loom - No Longer Available
Dox replied to Dox's topic in Parts for Sale
Engine loom, believed complete but scruffy needs rewrapping really In the box is the rear part of the shells loom, incomplete (bits cut off) may be of use for spares? -
To be clear, I don't want to sell the coilpack as its ideal for sorting situations like you're having, when it drops on to 4 cyls temporarily fit the spare coil before swapping back to confirm. Good luck with it :)
-
Coils do tend to breakdown when hot. I have a spare that ST4stokie borrowed to confirm his was faulty, you're welcome to try it too, you're not a million miles from Crewe and will pass if you're heading for Stanford tomorrow?
-
G60 engine loom / 1.8T engine loom - No Longer Available
Dox replied to Dox's topic in Parts for Sale
Will now separate. I can take to Stanford tomorrow. Offers? -
Gearboxes, 1.8T EVS, 10V V5 EBS, 20 each GWO (Crewe) - SOLD
Dox replied to Dox's topic in Parts for Sale
Sold on CGTi pending collection / payment. -
Sounds like one of the wheels or tyres are miss-shaped?