steveo29
-
Content Count
1,904 -
Joined
-
Last visited
Everything posted by steveo29
-
plating wont hide any pits or nasty bits, if theres defects that wont sand out you might have to powder coat it
-
makes me wonder if dodgy leads could affect the signal for the timing light? thing is if you set it up staticly it should run decent , just not spot on ...i cant see it causing random problems
-
i have a 68mm and mine sets up okay, also had the setting confirms by pitstop
-
have you tried a second timing light? i had one that made the marks move around a bit
-
timing shouldnt cause a misfire id look for a air leak or inj trouble
-
so if the part numbers match then its the same internaly? fancy looking up a few numbers for me/?
-
can i kick you in the ass if my car/seats catch fire? does the corrado match either of those? pics?
-
i need some help wiring a mk3 heated seat loom (1997) onto a mk2 heated seat switch some of the wires are the same...some not, i need to know what to do about the ones that dont match heres my plug from a mk3 heres what the mk2 switch plug looks like...i dont own this so i cant test/use it :oops: :roll: :oops:
-
my rallye seats were leather front and rear (except the cloth bit lol) my mk3 colour concept recaros are vynil on all sides and rear ...cheap sods
-
its not odd at all for a jabba unit to fail at low miles ...lots of us have had problems where did you get the seal from...not any old seal will do
-
Noisy belt/pullies on 92 G60 (Still having problems)
steveo29 replied to claire.major's topic in Engine Bay
special pliers for them clips...or try vice grips -
our polo randomly spat out a plug and all the thread in the head were gone...£28 for a helicoil and all is well again
-
depends who rebuilt it and if theres proof
-
g werks will sell you a can of charger lube...he might also advise on the seal if you call and ask nicley
-
sticky idle switch>?
-
prob a charger seal gone....8k is enough to have a seal pop out
-
thats a great price he's ooop north mr beige, prob easier to mail the cover to him
-
depends how theyre treated and serviced...150k or more shouldnt be a problem for a cared for engine
-
Noisy belt/pullies on 92 G60 (Still having problems)
steveo29 replied to claire.major's topic in Engine Bay
ah yeah ive got some of those...theyre pretty good -
Noisy belt/pullies on 92 G60 (Still having problems)
steveo29 replied to claire.major's topic in Engine Bay
what are irwin bolt grippers then studley? -
the 50mm is interchangable on all 16v engines....so you could always swap it back n forth to see what you like best imo its not going to transform the car into a firbreathing beast or anything..more of a subtle differance
-
16v Jetta engine into 16v Corrado as head gasket solution?
steveo29 replied to snattrass's topic in Engine Bay
£200 is more like diy /mates rates i dont think its gona be cheap to pay a garage to remove two engines and refit one along with new clutch, waterpump, cam belt etc -
im looking for a heated seat loom for 1996 golf seats...a 1997 passat has come up are they likey to be same similar?? all cetral electric ?
-
16v Jetta engine into 16v Corrado as head gasket solution?
steveo29 replied to snattrass's topic in Engine Bay
who's to say a £100 ebay car will have a better engine? chances are it will need some new bits n bobs anyway how many miles has your engine done -
Noisy belt/pullies on 92 G60 (Still having problems)
steveo29 replied to claire.major's topic in Engine Bay
charger off time...