steveo29
-
Content Count
1,904 -
Joined
-
Last visited
Everything posted by steveo29
-
yeah standard....do gsf sell em?? for some reason i cant access their site
-
looking for a 3bar fpr.....who's cheapest? cheers
-
i need to speak with bilal from sns uk....anyone got his email please
-
my g60 with all the pipes still there does make a noise when changing gear. i think you can hear the boost being returned
-
what do you ask for at the ford dealer???
-
do you think them terminals mentioned above will go in my old plastic connectors?? (just being tight)
-
one more thing gav...do you know what terminal would be in them passat connectors you sent me cheers for the help
-
cheers for the reply gav, do you think those terminals would fit into my vw plastic blocks??? the seals you mention..are you thinking 192177/8?? would any of the budget crimpers be worth getting....cant afford loadsa at the moment you say 1mm cable....i dunno if you got my pm, but the original measures 3mm dia and goes onto 2.2mm anyone else reading this......go and check your loom mine is toast
-
ok my g60s inj harness is baked up and horrible, i need to buy new male and female termianls ive seen some similar ones vehicle wiring products but im not 100% sure what ones i need can anyone help??? h100vw are you there :cry: need some help mate i pm'd ya
-
yeah i usually find going into 2nd helps....but it still does it sometimes, makes you look like a mupet if your shunting into a space and it keeps grinding
-
my g60 has always seemed to grind into reverse, i make sure the clutch is right on the floor and the car has stoped any ideas
-
oh you mean the foil wrap like on some o2 sensors etc......i think demon tweeks sell it too so i can buy all the pins new except the males?? cheers
-
cheer gav...no rush on the headlight conectors so theyre not special vag conectors then??? you recon is hould use that silicon wire..the really flexy stuff?
-
ive noticed my g60's injector loom isnt in best condition,it looks a bit hard n brittle in places any one brought one latley...what do they cost? or would it be posble to make a new one with some better silicon wire
-
there is a c clip....what ive always done is just give the cv a good whack while holding it, it should pop over the clip in 1 o2 2 goes you can hit it fairly hard, but shouldnt need to
-
the halfords ones dont have a lining....fits s well it doesnt move even in high wind, mine didnt budge in a god storm wothout straps its doesnt look like its that great....but it does its job very well beacuse its not much thicker than paper you can give it a good shake and its nearly dry.
-
i had a mytsterious noise on mine....after alot of messing around it was the cam belt tesioner maybe run the car with no belt cover...wait till its whining and spray a little wd40 on the tensioner....it will shut up for a short while till it dries out
-
i think its to let water out if your engine gets wet....otherwise it would all fall in when you go to top up
-
be carefull of mice/rats etc if you leave the window open a bit id just go for clean ,dry and jacked up with the brake off....trickle charger if possible
-
preety straight forward to use.....i always use the furthest from the master cly first method working to the nearest last i also go slightly over on the tyre pressure ....its up to you on that one, oh and test for leaks before you try it with brake fluid
-
i did mine....took it out to the max with a dremel and belt sander didnt really make a big diff....spose it rips through the revs harder around 4500-5500
-
what so they just stuff the screw in sensor up the tailpipe??? works the same??
-
what sort of price do budget widebands start at? any ebay bargains? and how would a garage test a car??? surley they dont weld nut into everyones downpipel
-
i tried a cover systems one and sent it back.....theyre designed to let water in :( which seems pretty usless for a car cover!! i now use a meduim size tyvek from ha;fords of all places.....almost a perfect fit and it doesnt let water in and still breathes..£65 at halfords, be aware any cover is only suitable for use on a clean car,any dirt may scratch it
-
stevemac.....what did you find differant??? just intrested :roll: