Keyo

No worries George can replicate any fuel line, they custom made my Injector rails on my Mk2 Golf 16V which are a lot more complex so they will 100 % be able to do it for you. Really a ton of these need making at least to feed the market. You'll have to bell them up on Monday and have chat with them if you decide to use them, very helpful staff there. I would be careful making your own up unless you have a facility to pressure test as the last thing you want is squirting fluid on a hot exhaust, Of course Hel carry out this procedure to any lines they custom make.

Sounds like it could be the NO1 suspect then Shaun.

Geaorge Hel Fuel lines will be able to make you a stainless steel one up and also will supply you with banjo bolts and washers. Think they charge about £50.00 includes postage a line and you'll have to send your old one to be custom made. Might well be worth asking them to record the manufacture to help other folks out so they don't have to send there old line in - If you have butchered the old line taking it off you will have to do a diagram of how it looked or send in your whole refurbished fuel pot with pump etc. I have used these guys they are the Bees Knees. https://www.helperformance.com/ Or you could even do a group buy to bring costs down.

Immobiliser possibility but you say it cranks.

Could actually be the ecu check it out for water damage on the plug housing or any cracks in the case.

All depends on how good the parts are mate as a lot of cars get broken because of the body work, I imagine you'll be asking for a fair few photos. I really recommend you sand down your arches to see what is happening as it may be surface rust on the arches caused by over sized alloy rubbing the arches, was in my case gleaming metal underneath. Shaun told me to do this the body shop can see what actually needs doing rather inflating a price to cover any eventuality.

Thanks Chap my car going into Vince for a full engine rebuild in a couple of months so i will get him to check it out, as mentioned looks like my loom is just low beam .

Amos in Derbyshire will have some mate there is also a breaker in Swadlincote. Here is a link to his ebay page. Only has a fraction of his parts on ebay. https://www.ebay.co.uk/itm/Corrado-Front-Wing-Driver-And-Passenger-Side/273789574980?hash=item3fbf215f44:g:ZMYAAOSwzFVa-xzY

Thanks Fla the relay has four cables going to it .

Hi Ive sanded down my battery trays in the last week and also sanded out a bit of surface rust and primer/spray . ;aquer etc. Whilst int hat area I replaced a grotty old looking relay on the uprated loom and aslo the cable and inline fuse to positive and the cable to negative. Lights are working fine. My question is why do I only have one Relay when I see other uprated looms with two, three or four relays ? Is my present set up dangerous ? Thanks

Stuart have you considered these ? They only need spigots as the bore is different and are a modern take on the RZ but 5 stud. Spigots and bolts come with the wheels free. Ronal is a German quality brand not cheapo chinese crap, they also own speedline. £550 a set delivered which is great value for a OE manufacturer. I really want to see what they look like on a Rado. You can change the black Ronal centre caps to VW or BBS. https://www.performancealloys.com/ronal-lsx-silver-polished

Good read this is I wonder where it ended up ? Missing the trim was a major negative though.

https://forums.mwerks.com/showthread.php?9096665-Fat-5-or-bbs

A shame your not local mate you could of popped round mine and tried an RS771 and Rx226 to see if they looked correct, at a guess I would say they would ! BBS Rs GT look the bomb on a white Rado. Same sort of style in the RX/RS range look good !

Thanks just working out the maths because you can buy a complete kit from Phoenix engineering , as from what your saying you have to buy the headlights as you cannot buy the adjusters stand alone from Depo ? Phoenix kit. https://phenixengineering.com/shop/corrado-billet-euro-light-adjuster-kit/ Maybe ask Depo to release the adjuster part stand alone for sale ?

Can't find the adjusters, the part numbers posted are not bringing anything up on google ? Would you have a link to the adjuster thanks. Cheers.

Great find mate wish you had posted this a couple of weeks back as I forked out a fortune for some new old stock adjusters that crumbled when I fitted them !

Probably a mk3 Golf but not sure to be honest, might of been an aftermarket alloy as they are rare .

5x100 , only thing is they rarely come up for sale . RS771 the split version are very easy to get hold of . There are other Rx2 from different models such as Vauxhall’s and Volvo but have different stud pattern and ET.

It will play your Itunes, charge your phone and handsfree , CD are now dead so pointless really. I don't think they have been long out so the price will drop I imagine.

Spen watch this video at 4.45 and you will be buying one ha (shows in green) ! Also great channel on youtube may I add. I've got a Alpine in my Rado but definitely would prefer the Brenen, going for one of these in my MK2 Golf in the future, as all electric the price should drop.

Possibly the most ideal Stereo for a Rado. This is the retro modern version of the Blaupunkt Bremen with all the mod cons. Has what looks like a tape opening but in fact is a flap that opens up for USB etc Can change the display to green. Great bit of kit but not cheap ! https://www.ebay.co.uk/itm/Blaupunkt-Bremen-SQR-46-DAB-Retro-80s-Classic-Bluetooth-DAB-USB-AUX-Car-Stereo/262563033033?hash=item3d21f9efc9:g:CsAAAOSwWbRdytqH

I think in future we are going to start seeing the rod springs snap and metal bracket retainers that hold the springs. You can still get one side spring but the other is obsolete I ordered a few of the offside none bolt trumpets and a new spring from classics.

Bet them Vento cups rarely make an appearance, very nice.

No I want your leathers just a bit of black shoe polish to match my interior and I will be well away !