Keyo

You can still get the one side from Heritage but the other is obsolete. Also behind that there should be a protective case for the pulley wheels and aux belt which is still available as well.

Hi Tony, Sounds good to me chap does the old one pop out I have a couple of good used ones in spare complete mechs but wanted a new one to match all the other new parts on my mech, just my ocd playing up again . Thanks

Thanks Sean. I stuck it back on then a few seconds later I thought never seen that mark on the pattern before before, then it just bubbled right in front of me and I swore loudly ha !

Well done that look mint SI.

Such a crazy design putting a plastic swirl pot casing under the car next to an exhaust.

Would be great if you could by one off them for under a £100 they cost a lot of money !

Very helpful skilled member off here made me this as I destroyed my old one glueing it back on to the gearknob. Nice little mod at the bottom to match my decals. Numbers are the same as OE pattern. Word of advise if your OE pattern falls of the knob replace it back on with double sided tape as normal liquid glue bleeds through to the pattern decal and bubbles it up.

Looking forward to getting these fitted . Hopefully work as purchased second hand.

Hi, I have managed to source some new parts form classics and new OE wiper Mech motor. I just need two new parts to complete a whole new wiper Mechanism Part Numbers I require are Operating linkage Part No 536955325 (annoyingly sold a few new ones of these last year ) Drivers wiper securing nipple 536955216 Green circles indicate where missing parts go. All the parts you can see are still available from classics however the long silver rod is obsolete but an english seller on ebay has a couple new old stock for sale. Thanks

Bonus !!!

Like what you have done on your Schrick Martin on the closed thread looks ace.

Tham Callipers look mint Sean.

Good luck with this mate , really is worth somone sending a Corrado KR OE swirl pot to Pro Alloy to be reproduced, Below is the MK2 Golf 16V that they sell all ready. I have two spare swirl pots for my KR Golf but this is the route I would have taken. Although they do cost a lot so would've left me grumpy for a few days. http://www.proalloy.co.uk/cgi-bin/sitewise.pl?act=det&pt=&p=2901&id=proalloy

Thanks Toby. Pictures loading and can also edit. Loving the new platform.

Spend some time on this site and you will be more helpful to yourself then any customer service from VAG and Heritage, I have to tell them they are incorrect all the time . http://www.oemepc.com/tvn_result/search/tvn/357919077B

Part number you posted is not a part number not sure where you got that information from.

https://www.volkswagen-classic-parts.de/en/lampentrager-a9e128.html Still available from classics.

Also this from a Skoda but clear light but will probably be still available form Skoda dealers as was used in later models. https://www.skoda-parts.com/spare-part/357919243d-ashtray-light-bulb-oe-8069.html

Part Number is 357919243A K25 for the ashtray and I think that the auto is the same bulb ? ??? https://www.ebay.co.uk/sch/i.html?_osacat=0&_odkw=mk2+golf+16v+clocks&_from=R40&_trksid=m570.l1313&_nkw=357919243AK25&_sacat=0

I'LL sort it for you mate hold on- if the green is not available skoda did one in clear light.

Sorry is a diode.

This is the part number for the blue high beam it is not a diode. 357919062

You can still get the bulbs mate from VW Classics Via Heritage got one last year. I believe you have written the wrong number for part. Im pretty sure Arz tuning do the bulb its called a diode I think. Should look like this but in blue. Could be that your headlights are not functioning correctly. Should be a common part I guess if its a diode.

Look at the front grill is it colour coded ?

I Dont think thats a Storm looks more moonlight blue, Sticker in back of bott will have paint code. Also wrong alloys and no decals.