-
Content Count
16,478 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by Supercharged
-
LOL - yeah, best get a spare pair of each too...
-
H3's for the fogs too but that's going a bit far!
-
Ok, fair enough... I'll get you a pic over the weekend if no one else does by then... The early switches are alot bigger than the later variety...
-
Yep - H3's for mains...
-
OOOOOH...
-
What colour is yer interior? I have some platinum door cards spare...
-
What a show room! Yeah - does seem a bit steep but we don't know that they didn't just spend 2k on it replacing bits to make it perfect...
-
Nope, the black one is for the gauge and yellow is for A/C but the replacements for these are now black as well...
-
Yep, deffo check the water/heat exchanger first... it's the square shaped thing the oil filter screws into...
-
I'd leave the car longer than that or disconnect the battery neg as you don't want the fuel pump aftter run kicking in!
-
Flat spot in low revs and slight increase in tappet noise
Supercharged replied to matth76's topic in Engine Bay
Yep, without the CPS signal you loose the sequential injection... -
... I wonder if someone had a go at lowering it further with an angle-grinder...
-
They should be Vogtland or used to be Rock...
-
Flat spot in low revs and slight increase in tappet noise
Supercharged replied to matth76's topic in Engine Bay
A faulty CPS will make it feel 30bhp down... -
Get some H&R's What springs are on there at present?
-
Sam, you really are the unluckiest bloke I know when it comes to getting things done by other companys to your car!! I have no doubts that when it's finished it will be a stonking motor tho!!
-
What sort of files are they Steveo?
-
Sounds sensor related, you need to get it on VAGCOM really...
-
Yep, found the same thing on Kevhaywire's car a couple of weeks back, the green O ring had just started to disintegrate... luckily we managed to get it out without dropping bits into the fuel rail...
-
Should be 1.2kohm +/- 300 ohms for a good sensor
-
Yep, you have to click the post reply button tho (not use the quick reply box at the bottom)
-
Reverse light switch??
-
Think thats the plastic temp sender housing...
-
Flat spot in low revs and slight increase in tappet noise
Supercharged replied to matth76's topic in Engine Bay
LOL! -
Stickied and moving to Suppliers...
