Supercharged
-
Content Count
16,478 -
Joined
-
Last visited
-
Days Won
2
Everything posted by Supercharged
-
If you need to cut the old bracket off, just use some long cable ties to fix it back on, they'll never rust :wink:
-
Has this just started as the weather is getting hotter??? I had this last summer and it was to do with my SNS chip being one of the latest and sticking too much fuel in for cold starting... fine after 5 seconds - Darren was just going to give me an updated map when i next came down.
-
Look under the rear wheel arch below the filler cap - it has a plastic cover over it... use new jubilee clips if it still has the VW originals on it.
-
If its dropping and copming back again and not indicating the road speed then it's probably a faulty speed sensor ontop of the gear box (assuming you have an electronic speedo - early G60's were mechanical) - the sensor is about £12 from VAG What else has changed since it was off road??
-
Or some circlip pliers...
-
Ring Stealth for a quote they do this work on a daily basis... I take it you want cams that are different to what you have now, ie standard??
-
Well, the pump is in the same place but it has a bracket and the the charger stuck ontop of it making it quite a big job... PAS stuff is ok where it is tho... Xchange pump from VW is about £25, get a new stat as well (fiver)
-
Whats the most embarrasing moment you've had in your corrado
Supercharged replied to surfer.vr6's topic in General Car Chat
bristolbaron, It would be if she wasn't one of the Mods little sisters.. :wink: -
Get a VT mount, VR6 mounts we're to sloppy out the factory... Hope you havn't damaged the bonnet?
-
RA2 for me
-
SEAT BELT GUIDES WANTED, BUT WHERE DO I GET THEM?
Supercharged replied to jboyslick's topic in Suppliers Forum
Errr... VW? -
OOhhh... So are you actually supplying these??
-
For a VR6 I take it then?? - yes you need the bearing as well.. If its not a VR then they've sent you the wrong ones.
-
I take it your suspension is original so you want to get shocks / springs along with new front top mounts and rear bumpstops as a minimum.... Either Koni Coilovers or a Koni shocks and H&R springs seem to give the best results from what i've seen altho there are cheaper options available
-
are there any stealers employees in the forum?
Supercharged replied to surfer.vr6's topic in General Car Chat
Nelson Willbury is a parts dude at Audi, really knows his stuff too! -
Hmmm - how old is the paint as I tried to get some about a year ago and was told it was obselete... Maybe best to go to a bodyshop who can match the colour to the car, I can't remember what the technology is called but the basically scan your paint and the computer matches it, great for older cars and alot of places do it now...
-
Errr... are you sure yours is Aqua?? - does the code on the can match the one on your rear panel? Maybe the paint is out of date...
-
hehe
-
pic request? ign timing mark on flywheel/gearbox
Supercharged replied to steveo29's topic in Engine Bay
I think he has a G60... After Darren and Steve set mine up I got the engine to TDC today to have a look as i'd never been able to see the flywheel mark before, I can now just about make out a l just behind the toothed section... -
If you have the Samco reducer and are still using the standard intercooler, you will need an RS outlet... Part number 191 145 755 They used to be £12 from VW, they are now £70 - G-werks do a kit...
-
Forget strut braces, get ARB's..
-
What make of Pads did you use? Maybe worth taking them off and giving them a sand, also check that one wheel is not getting a lot hotter than the other...
-
Hi, just wondering if anyone has any knowledge or used to own this car... A friend is thinking of buying it, its a black G60 with black wheels and was advertised at Inters... Owned by a guy called Dean i think in Nottingham...
-
lol -really?
-
Someone was knocking them out at Inters yesterday for £35 brand new, they are about £50 off the shelf from GSF now...