Andi

Well, I've always used the first post as a guage (ha-de-ha) on what the deal comprised of. I have added a Poll to the first post - asking whether BUYERS want white dials by day, or black dials by day. Please, only BUYERS respond to the poll. No point if random people screw up a group-buy not involving them! Then, when that is decided, we can progress with the lighting :)

Well, as I work for Carphone Warehouse - and I'm there at the moment (I can access the forum from my till.. hehehe) then I would have to agree 100% with the new law. I don't care what you say, but anything to do with touching the phone - finding a phone number, changing profile, etc, WILL distract you and take your eyes off the road for a sufficient amount of time for you to crash and maybe even kill somebody. Yes, there's yoghurt-eaters, newspaper readers, etc etc... but then will get bans, points etc for dangerous driving and drinving without due-care and attention. This is a law specific to mobile phones as it is a LOT more common. As for the "same concentration as somebody sitting next to you", I would tend to agree and disagree. Due to road/engine noise, tinny voice reproduction through handsfree kits, etc, you will have to concentrate more on what the person is saying in comparison to somebody sitting by you. But personally, I have absolutely no problems with talking on the phone handsfree when tootling along the motorway - however, I wouldn't do it in fast-moving traffic or when I really do need to concentrate (fog, rain, etc). As for smokers, I don't like you lot anyway since you make me cough. But soon you won't be able to light-up in most public places (I hope) so I'll let you have the car as a smokers area - just not mine!

Well, mine will hit 192k miles by the end of the week, and its generally been doing pretty well. All in all, over my last 20k miles, I've spend just over £1k on essential work - including servicing. I'll get this baby to 250k no probs ;)

I was in Maplins today asking about UV lighting. UV Leds are available, but at £49.95 EACH, I think we'll skip that idea. As for the strip, they do a 30cm UV strip, which includes a transformer to drop it to 12volts (meant for a PC) and they're £6.99ea. If I buy 50 of these, I can get them for ~£6.50ea but that is going to put the price up of each 'set' by £13.... I haven't looked further into a cheaper source of these yet! Lets hope I can find one. And, I'm not sure if 30cm / 12inches is going to be too long for the guage pod... (Bit late for me to pop to the car and measure mi' pod right now..) Yes, the guages will be in MPH, with a smaller inner ring for KM/H. The general consensus seems to be white dials in the day, and black dials with majority blue and occasional red illumination. Font should be very similar to the original dials, but may look better as the new-style VW font (we'll see what they design), as well as the Corrado logo on the rev. counter. I will not force people to buy if they don't like the design! Once the payment is received, the manufacturers will send images and designs for us to approve. So don't worry too much about it. I hope you'll all like 'em though :) I'll see if I can get one of them involved in this thread too to let us all know. We'll have to see. The costings, payment options and people involved are still listed on the very first post of this thread.

I've been rather quiet on the forum recently - I'm actually quite busy for once but I am about! So I thought I'd fill you lot in on the goings-on on my very own C... Firstly, a month ago, went to start the car... nothing. Late Monday evening and I just wanted to go home, so rang RAC, and they send some guy from a recovery company - not an actual RAC bloke, who diagnoses faulty starter. Knowing full-well about the ignition switch problem, I made him double check this... he swore it was fine but kept checking his watch, so I told him "Thanks and bye". So arranged the day off work and got the car booked in at a nearly-local garage north of Derby (I wasn't at home!) and he said the starter was fine (how bizarre..) and the ignition switch had gone - so wired me up a bypass, onto which I have now made a push-button start. Second problem. Coming back from No-Rice a couple of weeks ago, nearly home, then CLANG. Then every preceeding dip in the road *clang clang* from the front-right. Pop into ATS Euromaster the next day and up on the ramp its obvious: the anti-roll bar linkage had sheared. They should be replaced in pairs. ATS wanted £27ea, VW £40+ea, ECP £20ea and GSF £12.50ea. So, ordered the VW ones.... no, only joking! GSF ones turned up a couple of days later, and ATS fitted them and redid the tracking (spot on I might add!) when I finally got round there! Then there's today. Car was absolutely fine this morning - obliterated all sorts as I darted around Derby. Went to goto the cinema this evening, "click, vrrooom, bang!, splutter, splutter, stall". D'oh. RAC man came this time (yay!) and the Vacuum Accumulator had exploded (or imploded?) causing a rather severe vacuum leak. So he dispensed half-a-roll of tape round it and the car is now back to being alive! So the gf and I went to the slightly later showing instead ;) Finding Nemo is quite a nice film... I'll be off to CMS in Derby to see if they can supply, as ECP and GSF have drawn a-blank and I bet VW will be a joke. Happy days!! Let's just hope that's it for now! (Except I need 4 new tyres... but that doesn't really count).

Nice one, Henny! We all await your findings with baited breath!

Plonk a TDI engine in ya' C... ;) I get about 300-350 miles to a tank, thats on mostly town, mostly heavy footed, and in a VR.

stevemac: I doubt you'd see them! Remember the background would be black at night and on a dark road you'd have no light to make even a white needle visible. willmason: the Corrado needles are not designed to be lit from behind, therefore the prism does not extend to the centre hole. The centres are just black plastic. Nice idea, but I don't think it would work.

Nitrox is used by divers for deeping diving, and contains a higher ratio of oxygen to nitrogen (to reduce the effects of the benz). Nitrox is a binary mix of Nitrogen (N2) and Oxygen (O2) - so no other gases. The ratio however depends on its rating. EAN 25 would be 25% oxygen, 75% Nitrogen, for example... Nitrous Oxide is N2O. By weight it is 36% oxygen (whereas normal air is 23.6%). So a Nitrox mix above EAN 36, should in theory, be better.... The nitrogen in Nitrous Oxide is used as a cooling agent (thus increasing the density of the air) and helping the oxidising agent to burn the fuel more aggresively. However, whether a normal Nitrox mix would have the same effect, I don't know. Did you know that Nitrous Oxide is actually an irratant of the mucus membrane plus contributes to smog and acid rain? Sunlight actually breaks down NO2 and creates ground-level Ozone.... not good! Irrelevant to car use though, 'cos you should be using the oxygen up... The nitrogen isn't good for the CAT, though, iirc. *puts A-level Chemistry notes away*

Oichan's site on his install is pretty good: http://www.oichan.org/mods/starter/starter.htm Or click here for an English translation! (ish..)

I wouldn't bother. Mine was replaced less than 2 years ago and has gone again already. Install a push-button start. Cost £1.49 plus some wires. Assuming you can still get ignition, but can't get to 'Start' on the barrell...

UV has been mentionned before, if you read the thread ;) I think that is the only option... so next question - cheapest place for about 100 UV LEDs compatible with the holder in the Corrado?

Its not the fitting that's the problem - its lighting the needles in the dark. They are currently front-lit - but with these dials, if you leave the front-lighting in place, you will loose the night-glo effect. Hence requiring some other way of lighting the needles.

Still 4 places yet to fill - and we still need an agreeable solution to the lighting problem....

If indicators blink red, yes, it will fail the MoT. You can also be pulled by a copper at any time for this too :?

I hope you get it sorted, Corvr6! Not all VR6 engines are doomed. I'm on 191,000 miles and top up from min. to max. about every 1500 miles. That's running Syntha-Silver-alike oil, which Ant (BananaMan) gets for me cheap at £7.00/5litres at oil-changes, then topping up with Halfords Semi-Syn - which seems to suit my engine fine. I've heard mixed reports on the Halfords stuff. Obvious claims like "Oh, it's not as good as such-and-such at £21/4litres..." but for the price it is, it does me fine. I've run it in 5 cars, and they're all running nicely still!

It's an auction, guys. Funnily enough, the price will rise.... They've currently got over 6 days left!

TBH, I have the Bentley manual, but don't actually think I've used it yet. Thanks to Ant (aka Banana man) I now do (some of) my own servicing: oil, brake pads-n-discs, easy suspension stuff, etc. And funnily enough, the garage I trust with the car is the ATS Euromaster in Coulsdon. Very local to me, I've been using them for years (since my first car), I source the parts from ECP or GSF, give 'em some cash, and they do a nice job every time (VAT free!). I can walk home if needed, and they love the car (better than the usual boring stuff they get in!). Plus, no lead times - normally just turn up and its on the ramps within 10 mins. It'll be going there next week to have my front Anti-roll bar links replaced - my drivers side has sheared off and is currently banging about :shock: I'm not saying all ATS's are good - I bet most of them are crap - but you can sometimes be lucky with local normal garages.... Oh, and they have one of those twin-V jack thingies, that jack the car up by all 4 jacking points - since I can't get on normal ramps without the front spoiler bending like Beckham! (on a non-lowered C! :shock:)

There will be no bumming of the driver (me!), thank you very much!

Got my VR when I was 21. 6 points for speeding (2 SP30s) and only 2yrs NCB (at the time). Went under the same insurance as my previous car (MX5! lol) and then at renewal, with 3yrs NCD, still 6 points and turned 22, was £1111 fully comp with Adrian Flux. Just renewed for £950 Fully Comp. So yeah, course it's possible! And I live in South London, in a not too fantastic area, car is mod'd, and it's parked on the street all the time.

I will be about if people wanna find me... :) SatNav and Big-Red-Button (Push to Start) now installed... ;)

You know the HID upgrade will fail the MOT and would be illegal, yeah?

Right - thanks! You've just given me the confidence to have a tug (oo-err!) and yes, it popped out eventually! I really should have re-thought that sentence... Thread locked.

Can you just pop out the wing mirror glass and plastic holder, then disconnect the heater wiring? Don't really wanna pull too hard and break something - though I'm sure I've done it before... I have a spare complete mirror unit - and the one on the car is smashed at the mo - until I can be bothered to get the spare sprayed then fitted, I'd like to have the mirror bit back ;)

Because this would be a one-off run for the Corrado-Forum.net members only, money is required up-front in order to pay the manufacturers to make the dials. If the order does go ahead - I will be sent designs and proofs for us to confirm the order, however, this would be as a group decision, not on individuals. So its all for one, and one for all - or no dials at all ;)