1xshaunx1
-
Content Count
1,563 -
Joined
-
Last visited
-
Days Won
16
Everything posted by 1xshaunx1
-
I feel emotional
-
Unlucky Monday’s are my forte mate. On the upside not a bad list of stuff for them to put right. Was it the passenger front that clipped the door step? New ones best before alignment anyway Maybe tomorrow will bring EPIC Tuesday 🤞
-
It’s behind the battery to the left as you look at it from the front of the car. Take the battery out to get proper access. Mine looked like this before I cleaned it up.
-
This guys were very good. I think he is still doing the shorter ones
-
Full engine bay. With a sprinkle of carbon goodness
-
You need the plastic base out of a Corrado with the wire from r the horn still attached, reinforce the wire with tape or similar. Then drill a hole in the wheel housing to take this wire, be accurate as it will decide wether your canceller is in the right spot or not. Make the hole big enough and you are laughing
-
I would get it through a MOT to achieve max value, you’ll be looking at loosing a fair bit without one.
-
Crap jobs but worth it in the end. I think I’d try with the other manual loom, Only one plug for the manual box, speed sensor, but wiring is definitely not my strong point.
-
Decided to have a go at replacing my grotty looking wiper motor and bracket and tidy the whole area up by at long last having a go at fitting my spoonfed windscreen trim and wiper cover. Bit of a faf about but looks amazing when in place.
-
Fitted the rest for of my beige tunnel, handbrake cover and new cup cup holder. The cup holder was off eBay at about £30, pricey but slightly better than the last one as it’s a little bigger and can get a can of coke in it, looks a bit more oem too.
-
Got my new floor mats off of Dr_G60, thank you very much.
-
Put them all in now but did take one of the drivers in position and it fitted like a glove
-
My beige mats have come. Very nice quality. Thanks Gunther. He says he only has a few sets left. Pm him if interested.
-
Looks the business mate
-
While in my van went past what looked like a blackberry 16v reg started M144 ——— heading out of Sheffield approaching Tinsley Viaduct north bound It was refreshing to see it being driven by a young lady.
-
He should have used rubber wedges at the bottom of the screen for gapping and to help keep it up till it sets
-
Must be an amazing day.,Well done mate
-
Blimey. Does that mean the front end will be done this evening.
-
Can I also add that you don’t have to take the seats out to do this. The centre tunnel comes out fairly easy if you lift the hand brake up enough
-
I would say though that the TRW ones were more like oem and chances are you won’t be doing this again if you do it right.
-
Both off of EBay Hasan. just put the make and part number I gave above in the EBay search and away you go. All VRs had the same rear brakes so should fit yours unless you have a different after market set up.
-
Looked like this near the end. The fan at the top comes on with stage 1 and both fans with stage 2. Stage 3 is not connected.
-
My wiring is like this. I have two relays in case one packs in I will still have one fan. My fans are bigger than yours and Flas’ so I used relays rather than go through the plug with power. I also pulled the black connector off of the thermostat housing so stage three fan can’t come in and kill power from stage 2. I also have a switch in the cabin I can turn on to bring both on manually
-
I have no idiot proof guide easy, although I did manage to sort it and it’s still works. This is the fan you want for the plug
-
Is the relay clicking and supplying power at the fuse box or still dead there. welcome by the way
