easypops

I best take these :)

Hi Anna, I've never actually measured them, but I would say those sizes sound correct. I can check for sure tonight when I get in from work, can't really see them being anything else though? Thank you again:)

Found this, no pictures though http://the-corrado.net/showthread.php?36675-G60-jet-scraped-turbo-idea-so-gunna-rotrex-or-similar

Look forward to watching this one, always liked these. Fairly sure it was Corrado Sunderland that owned this, or he did own a Jet that was 20v'd and then he just fell out with it I think? Might not be this one

Not got any of the above but it's nice to see you back on here......again :)

Thanks Anna, you are a star :)

Hi Anna, Thanks for the reply. You were next on my list to ask as I spotted the full thing for sale on your website. I might email Powerflex and see what they say, unless you want to? :lol:

More questions, I have an Eibach rear arb but one of the poly bushes is torn and missing the metal sleeve. I've googled and searched on eBay for a fitting kit or even just generic bushes in the correct size but I'm getting nowhere. Would anyone know where I could find these? The hole on the arb is 27mm

Cheers guys, I kind of guessed after I asked that I would get both answers and I guess it means there is no right or wrong, only fixed. Having said that, I've ordered some nuts n bolts and I think I'll weld one in.......I only have stainless steel ones at the moment and I'm not sure that'll be strong enough anyway........plus, it's not a mad priority as I have a good powdercoated one ready to go on.......I'll just need this one for one of the other cars :lol:

Hello all, I have an issue with a subframe I have removed from my red vr, one of the bolts that holds the wishbone on will not come out, it is free spinning(sort of) but it's only came out a little bit, I'm guessing that the captive but has sheared off? I happen to have a spare that had a similar issue, except the bolt snapped on that one. I have since removed a small section of the subframe to get access and have removed the nut. I plan to re use this and was wondering if a nut needs welding in or can I get away with a nyloc nut? I'll obviously be welding a patch over the subframe hole :) Spinning

Not this time :)

Shhhhh :)

Ha ha, not hoarding at all, my Storm is away for paint and these were on the list of bits I need........nothing wrong with a little hoarding anyway:lol:

Me please, and the scuttle trim bits too :)

Me please

Ah, forgot all about this, I'll do it once I get home.......unless I forget again :lol:

Also worth having a check of the fuel metering head to make sure the sprung bit is clean and free moving , and also the throttle potentiometer(throttle position switch), try unplugging it and see if it makes any difference. Oh and also check the wee vacuum lines that go from the airbox to under the rubber boot at the throttle body, for some reason they can effect the idle as far as I remember......it's been a while though:)

Not so sure mate, I thought Sprinter53 was from Germany and Renewart is from Spain

Yes, although I did neglect to use a capital. Full title Renewart-art&engine

Look up renewart on Facebook

They do come with the clip mate, I don't have any clips sadly but I think you can use a Land Rover one, available on eBay and very cheap too. You can let me now what you want to do, probably worth trying the clip first

They are Monte Carlo's 8)

I'll measure it up once I'm home mate, might be tomorrow though. Thanks :)

There are aftermarket faces that do fit but I'm talking about the actual real ones that are designed to go there. Very difficult to find these days and I have a USA set but as their dash is the other way round the curves are the wrong way round