Jump to content

G60Jet

Members
  • Content Count

    3,213
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by G60Jet

  1. Im glad that cat i hit wasn't that big
  2. I thought Ant was organising one to sourthern spain
  3. The Problem with fitting the C screen is the positioning of the screen has to be spot on otherwise the seal is damagaed or basically fits to loosely. the screen on mine was replaced and they had to stop the screen sliding down towards the engine bay.
  4. contact dunlops for stockests
  5. are you using the right plugs?
  6. when was the last time the ECU vac pipe was changed?
  7. if you think the VR is good, you should try the G60!! :D
  8. Okay i've got all of it bar the Cross member!! cost so far £200 I just hope easyjet let me on the plane with it now!! lol
  9. Well im the road kill expert, Bright lights daze cats!!
  10. the control box is always IIRC behind the drivers side.
  11. I just love the sound it makes, especially if you blip the throttle between changes!!
  12. Im guessing you'll be needing forged G60 pistons, as the standard ones arnt up to it. How big is your intercooler? have you thought of water injection to cool it down a bit?
  13. all the wiring for the loom should be there, take your door cards off and look. plus the electric window ECU goes in the rear, so you need to remove the rear drivers side trim to get at the wiring.
  14. G60Jet

    Like these?

    they have been selling on german ebay for about 4 months now, I'm still not sure about them
  15. Awesome show, they should put that washing machine car on ebay and see if it sells for more than the pacific imports lol
  16. linkage or cable guides, not an easy fix, zorst off time!!
  17. Counting the Costs Bumper Grill €54.45 Chin Spoiler €137.94 Spoiler Support €29.24 Plastic Air con Rad ducting Left €39.73 Plastic Air con Rad ducting Right €59.90 Cross Member (support For Bumer) €283.80 Prime Bumper Skin €507.40 TOTAL CAT COST €1112.46 ermmm more than I thought. I think i'll buy a bumper in the UK and ship it back!!
  18. You could take it from the power going to the heater switch? No cos then when you turn the fan on the volt meter reading will drop like a brick, i've got to re-wire mine after taking the fag lighter feed, f'in thinks goes up and down with every flast of the turn signal!!
  19. yeah its read and next to the oil pressure light, try topping it up a little from cold. a new header tank is only a few quid so change it if it fails
  20. did you tell him about the forum!! is not your outta here :lol: :lol:
  21. down the back of the rad, as you stand infront of your c, look to the right of the rad fan, just below the batter tray
  22. the faster you go the worse the wind affect you too.
×
×
  • Create New...