VWVW

Dohhh :)

Thats a great result can you tell us which front arb manufacturer is this for cheers

On a VR6..the big metal Power steering pipe that goes into and out of the the radiator support at the bottom is that still available from the dealers. If not can you use a similar one from other VW range.

Looking at the pics on your front end slam panel. I didn't know that there are 2 plastic trims at the centre of the slam panel that divert air to either side of the radiator. Mine are missing this trim :)

PM me your address and I will post one out signed for postage for you on Monday. It will be coming off my car and is still perfect. (Dont worry I have another spare but would like one in metal and if it will help you get the ball rolling) cheers

This thread may help you on the torque settings. I did an incorrect torquing and a bolt snapped on me. Not a nice feeling :) http://the-corrado.net/showthread.php?55411-Front-end-bolt-torque-settings&highlight=cross+member+bolt

cheers for the pic...I will try and find something suitable as a replacement.

Anyone has a picture of one still intact and in one piece just to see what it looks like.

Iam sure in the vid the seller says he spent a further 700 pounds to please the buyer and he still turned it down.

. .

Got the car trailored over to DG autotech last week to have all things brake related overhauled as its not something I feel confident doing myself. Once Done it will be MOT’d and taxed and will be my first drive for nearly a year. Cant wait! - All metal hard lines pre made (by corrado .net forum member Volksword13) - a full set of goodrich stainless steel braided lines - A new pair of front Calipers - VAG - Pair of front disks - VAG - Pair of front pads - VAG - Fully Refurbished Pair of rear Caliper – VAG - Pair of rear disk (Brembo) and pads (VAG) - Pair of rear bearings - VAG - Pair off rear ABS rings - VAG - 2x bottle of brake fluid - VAG - 1x ATE brake bias compensator plus bolts.

Guys...are these tailage foam still available from VAG dealers. If not what have you used as a replacement.

Hi there have you thought about giving this a go yourself? Is this for a vr6 ? Engine will need supporting at the bottom, bumper off and slam panel off. Not sure if the radiator needs to be taken off aswell to get to it. Bumper bolts may be hard to get off. You could take it to a garage to loosen the bumper bolts first If bumper bolts are corroded well worth getting some new ones from the dealers.

Hi mate. you can get this OEM continental Conti tech drive belt for £12.30 delivered at the below website. Dealer will sell this for approx £35 Part Nos.: 202440405 non aircon version http://www.carparts4less.co.uk

Thats the power steering fluid...I dont think its that expensive from the dealers. Not sure how many bottle you need for complete fluid change. You could top it up if you want. If the fluid has never been changed before whilst you have the front end open you might aswell change it completely. If you do drain and refill later the power steering pump will make a whine sound at the start...Think you just have to turn the powersteering lock to lock to get rid of any air lock and top up as needed.

Very nice...lovely plate too. How did you go about getting your car featured in Evo Magazine ?

Is that bracket the only difference between a VR and non VR radiator support. Thats good to know. Not sure if there is a tool station near you. They sell some protection wax that you may want to use for £3.20 on your radiator support see link below. http://www.toolstation.com/shop/Automotive/Lubricants%20&%20Sprays/Protection%20Wax/d60/sd2795/p41925

http://www.carparts4less.co.uk selling the same ate part for £66 posted

That metal part below the rad can be removed. If its really rusted try and source another one I had mine sandblasted and powder coated as mine was still good and spray a lot of protective wax in that area. If you have already replaced your radiator coolant you may want to prop up the radiator with axle stands before taking the metal part off for support.

Spotted this Corrado in an old evo mag I have dated 2006.

Cheers Rams for the pics but was after a perfect set...but would be interetsted in the bbs caps if you decide to sell them separately.

Hi Could I have first dibs on this depending on further pictures. How much tread is left on the tyres cheers

including the huge piece at the bottom :) Could you get some pics up. PS how much have I spent on bits from you now. You doing any loyalty discount cards :) Wil be heading weybridge next week if all goes to plan.

Any beige trim that goes around the tailgate glass area ?

Did you press the special spolier button and raise it for them to see :)