easypops

Its a spline bit you need........i have one you can borrow if you like? :)

Welcome mate :)

Nice one mate..........on the road again?........fuel problem sorted?

Do you never drive uphill? :)

Not sure.........but if they were ham flavoured, then the sky's the limit :)

Thats the way it is on here i'm afraid mate, if you want to sell something, then you need to price it

Welcome, as far as i'm aware you need to list it in the classified section? , i'm sure a mod'll be along soon to confirm :)

Just spotted you have an abf engine, if its like the 9a(i know they are similar) then the 5th injector(cold start) is in front of the block. Follow the fuel lines and its the one not on the engine.........on my 9A it was faulty so just unplugged it(electrical connection) with no adverse effects(4+ years)

5th injector overfuelling?

I have found my spare mk2 switch, PM me your details mate and i'll pop it in the post :)

Here is the fixing guide mate :) http://wiki.the-corrado.net/late_headlight_switch_repair.html

I'll have a look when i get home........99% certain i have one

daves16v does indeed do a repair kit...........mk2 golf ones fit and work just fine, might have a spare mk2 one if you want?.........if so i'll need to have a hunt for it as my garage is a bomb site lol :) I repaired my switch but have yet to swap it back as the mk2 one is just fine(but no, i'm not getting rid of it):D

Well done mate...........looking forward to seeing the pics :)

Anyone? :)

Welcome mate, sounds like a good project and at £150 you cant go wrong :)

Sorry mate, i didn't see you had taken a pic...........looks like they wont be of any use though, thanks anyway mate :)

I'm the same...........got off the top of my head........2 bonnets 1 front bumper 1 rear bumper 4 wings 3 doors 8 mirrors 2 headlights various fog/indicators(some ok some broken) 2 spoiler mechanisms(stripped) and at least 3 very full boxes of bits(1x16v box, 1xvr6 box, 1xbits box)..........then there is the stuff in the loft........16v rad, passenger side window mech................Oh S*it, i'm a looney:bonk: ---------- Post added at 11:41 AM ---------- Previous post was at 11:39 AM ---------- Oh and the obligatory set of spare alloys :cuckoo:

I might still be interested in the rears............my shocks are ok but i have a broken spring one side.........so i could maybe take them for the springs?........any chance of a couple of pics when you have time? Cheers Martin

I bought them years ago when i had a valver , by mistake, and as far as i remember they were for a VR6..........but size wise they are all wrong, at least for the koni's............also the koni springs are flat at both ends and the weitec's are rounded all the way. For all i know they aren't even weitecs(i'll check tomorrow). Maybe they are and would fit standard shocks?

I haven't read all the way through, but have looked on the first page..........what suspension was on it?........only looking for rears possibly?..........oh and i'd possibly take the passenger door rubber trim, the one that goes around the top of the door Cheers Martin

Here is the thing.................No 24

Today i brought the corrado out of hibernation:cool: and seeing as the weather was nice i decided to investigate what i thought was a possible broken spring:scratch:...........turns out its very broken :( So is it possible for me to buy a set of rear ones only?.......or do i need to buy the full set?...........also would any other manufacturers springs fit on as i tried a set of weitec rears i've been hoarding but they are far too thin at the bottom and way too wide at the top . Here are a couple of pics of the offending item........and a copy of the koni variety thats on it. As always, thanks in advance Martin

Timing info http://the-corrado.net/showthread.php?35577-Timing-on-2.0ltr-16v-9A-engine&highlight=2.0+16v+timing

Keep it in good condition and sell it for £25 after your done :)